Various morphological problems of bearings in motion   The noise and vibration of the INA bearing itself are generally very low. But for small and medium motors, office machinery, household appliances, and instruments that have special requirements for noise and smooth operation, low-noise bearings are usually used. The rigidity of a rolling bearing is determined by…

The problem of stuck inner and outer rings of the bearing   Due to assembly requirements, there is an axial seam on the outer diameter of the TIMKEN bearing outer ring. After the sealing ring is installed, the axial seam of the outer ring will increase due to the amount of interference. When it is increased…

Selection of bearing structure   The INA bearing type that can meet the rigidity required by the mechanical shaft system [When the bearing is under load, the contact part of the rolling element and the raceway will be elastically deformed. "High rigidity" means that the amount of deformation due to this elastic deformation is small.] In…

Explain in detail what is bearing hot fitting?   What is bearing hot-loading and what are the heating methods for bearing hot-loading? INA Bearing hot mounting generally refers to a heating process after the inner ring of the bearing is placed on the bearing stop of the rotating shaft, which is divided into two processes: hot…